 |
 |
Videos
 |
Torchmate Pro-Modified Buggy competing at WE Rock This is a video that we spliced together of our runs in Perris, CA at the last W.E.Rock event. It was our first event ever, so hopefully there will be less rollovers in the video from the next event. Thanks to Shaffers Offroad including Mike Shaffer, Jesse Haines and crew for using our machine to build us such a fantastic rig. It was a lot of fun. Length of video 5:16 |
 |
Torchmate 4 - 11'x30' Installed at Custom Fabrication in KY Watch one of the first cuts on a Torchmate 4 and hear from the new owners and operators about how their new machine will improve production and profit for their operation. Length of video 9:35 |
 |
Torchmate CNC Plate Marker and Plasma Cutter Our new plate marker goes to work cutting out holes, marking their size, and cutting out the final part. Length of video 2:01 |
 |
CNC Router Cutting 3D Image from Foam This is a video showing a router mounted in a Torchmate CNC cutting system. We used the Torchmate Probe Sensor to duplicate the part and then cut it from foam. Length of video 1:30 |
 |
Plasma Tube and Pipe Cutting Attachment This video shows a 3" pipe with 120 quarter inch holes cut into it in a uniform pattern around the tube. The system shown uses a Thermal Dynamics True Series Plasma Cutter cutting at 40Amps and 90 inches per minute. Length of video 1:14 |
 |
A brief sample of a Torchmate system cutting metal plate. Length of video 0:32 |
 |
Torchmate 4 CNC Plasma Cutter with Water Bed This is a new Torchmate 4 CNC Plasma Cutting System with Water Bed. It is available with either stepper motors or servo's. The machine in this video has stepper motors. A CNC Router is available as well. Call for a qote toll free (866)571-1066 or internationally (775)673-2200. Length of video 1:27 |
 |
More Torchmate Tube and Pipe Cutting Examples Our Torchmate Tube and Pipe Cutting Attachment cuts shapes into pipe from 1" to 8" in diameter. Length of video 0:09 |
 |
Questions about Torchmate? Call (866)571-1066 For our free catalog go to www.Torchmate.com. You can download our catalog online or you can give us a call and we will mail one out to you. Length of video 1:27 |
 |
More Plasma Tube and Pipe Cutting You will see our Torchmate Tube Cutting Attachement cutting some basic shapes out of steel pipe. Length of video 0:22 |
 |
This is a video of our new Torchmate 4 CNC Plasma Cutting Water Table with rapid moves of 2000 inches per minute. Length of video 3:39 |