TORCHMATE-RELATED SOFTWARE
   
Torchmate CAD Software Module
Torchmate Driver Software Module
Design2Fab Sheet Metal & HVAC Software
Rhino 3D Modeling Software
BobCAD-CAM 3D Design Software		 Torchmate home page
On-line catalog & prices
Software main page
 
BobCAD-CAM 3-D Milling & Routing Software - (Version 21)
Retails for $1,295, but included for FREE with Torchmate Physical Z-axis for Routing and Drilling
 
The Version 21 CAD-CAM system rivals the functionality of expensive CAD/CAM systems, and is specially priced for the small shop owner.

BobCAD-CAM Version 21 is perfect for job shops and manufacturers that do a little of everything. It is very easy to operate which makes it an excellent choice for the shop floor. It doesn’t take long to cut parts from the first time you open the software up. There are no long learning curves, which means that training is faster. Part making with BobCAD-CAM Version 21 is about as easy as it gets!
  
BobCAD/CAM Version 21 software is best known for its power and ease of use, turning small shops into highly competitive shops over night and allowing large shops to increase production time, time and time again. Functionality ranges from basic hole- drilling, ridged tapping cycles and simple profiling to the fast generation of complex multi-axis tool path with a variety of surface creating functions that the system offers. Most importantly, the added benefit of customizable post processors for writing NC/G-code programs automatically and full RS 232 communications features including DNC, allows the manufacturer the ability to reduce lead times and get the parts cut faster and more efficiently.  A comprehensive training package is included at no extra cost!
 
   
2 ½ Axis Milling
V21 CAD-CAM
Pocketing - With island avoidance, Automatic Spiral & Horizontal tool path.
Yes
Profiling - Open & Closed Shapes.
Yes
Engraving
Yes
Bolt hole Patterns - Grid & Circular.
Yes
3 Axis Milling
V21 CAD-CAM
Horizontal Z Level Roughing
Yes
Horizontal Z Level Finishing
Yes
Spiral Z Level Roughing
Yes
Spiral Z Level Finishing
Yes
Surface Roughing - Skin Surface, Revolved Surface, Swept Surface, Ruled Surfaces, Radial Surfaces.
Yes
Surface Finishing - Skin Surface, Revolved Surface, Swept Surface, Ruled Surfaces, Radial Surfaces.
Yes
Gears Creation & Machining
Yes
Clean Circle - Roughing & Finishing.
Yes
Direct Surface Toolpath To Wireframe
Yes
4 Axis Milling
V21 CAD-CAM
4th Axis Indexing
Yes
CAM & Communications
V21 CAD-CAM
RS 232 Communications - Fully Customizable by the operator.
Yes
DNC Communications - Fully Customizable by the operator.
Yes
Post Processor Configurations - Fully Customizable by the operator.
Yes
Post Processor Library - Available to all customers at no extra charge.
Yes
Customizable CAM Menus
Yes
Customizable Tool Library
Yes
Graphical Tool Rendering
Yes
G-Code Editor
Yes
Verification
V21 CAD-CAM
Solid NC Verification/Part Simulation
Yes
NC Code Back plot
Yes
Hole Making
V21 CAD-CAM
Drilling
Yes
Tapping
Yes
Boring
Yes
Reverse Boring
Yes
Peck Drilling
Yes
Reaming
Yes
2 Axis Lathe
V21 CAD-CAM
Customizable Tool Library
Yes
Roughing
Yes
Finishing
Yes
Grooving
Yes
Slotting
Yes
Facing
Yes
Collision Detection
Yes
Diameter Programming
Yes
NC/G-Code Generation
Yes
Available Training
V21 CAD-CAM
Basic Manual
Included
Enhanced Training Manual
Available
Multimedia Training CD Videos - Interactive training cds and workbook.
Available
Training Seminars - On Location or at our International Training School. Call for availability and scheduling.
Available