|
The Torchmate tube cutting
attachment fits into the slots on each side of your finished table that
normally hold your material support slats. You plug the tube cutting
attachment's motor cable into the connector for the Y axis. One motor rotates the tube, while the other motor moves the gantry lengthwise on the table. The coordinated effort cuts virtually any kind of design into the side of the tubing. Fishmouthing, through-holes, and other work can be done, making it ideal for fabricating scaffolding, race car roll-cages, and other industrial work that uses tubing. |
 Tubing from 1" to 8" in diameter can be cut with this attachment. |