The World's #1 Selling CNC Cutting System

   

Download Our 2009 Online Catalog

Give us a call
Toll Free
(866) 571-1066 or
(775) 673-2200

TORCHMATE 3
Industrial CNC Shape Cutting Machine  
  
Introduction   Construction   Software   Electronics   Accessories  
  
Torchmate 3 machines are available in finished, bolt-together form, or as a kit where you fabricate the table and rails from locally purchased steel.
 
Comparable in construction and performance to competing machines costing $50,000 and up, a finished Torchmate 3 can be assembled in 3 to 4 hours with a few basic hand tools.  It can be disassembled in sub-sections and re-assembled in minutes if it must be moved.  Torchmate 3 gantry kits require approximately 16 hours to complete, including fabricating the table.
 
Our automatic torch height control units, automated Z axis, and tube cutting attachment are optional for all machines, including our finished Torchmate III.
 

 
Torchmate 3 pictured with optional Arc Voltage Torch Height Control
(Torch & laptop computer not included)

 
Our finished Torchmate 3 machines have the following features not found on our Standard Torchmate or Torchmate 2 gantry kits:
 
    Massive extruded aluminum construction throughout.
 
    Finished machines come complete as pictured, requiring only 3 to 4 hours of
   assembly time.
 
   Torchmate 3 finished machines and kits come with dual 264 oz. in. motors on
    the X (long) axis, and one 264 oz. in. motor on the Y axis.
 
   X axis motors and gear racks are outside the frame rails on both sides of the
   machine, and are protected by a 1" steel rail overhang.
 
   Dropped rail on far side permits easy forklift loading of material.  Rail system
   is sufficiently long to permit the gantry to be moved to the end of the table for
   loading of material.
 
The Torchmate 3 uses the same precision linear motion Y axis components found on our Torchmate 2.
  
Supporting your material:
  
 

Finished Torchmate 3 machines are supplied with slat support brackets with slots into which 3/16" thick steel strips can be placed.  For cutting steel up to about 3/4" thick, you can mount the brackets on your frame as shown here.  For heavier material, fabricate a separate support table, and weld the slat support brackets to either side of the table.  The slotted brackets are optional on Torchmate 3 gantry kits.
 
Brackets are provided to hang the slotted brackets from your machine's frame, or mount them on a separate table to support heavy material (over 3/4" plate).
 

Call Toll Free (866) 571-1066
International Calls (775)673-2200
or Email: sales@torchmate.com

Our 2009 Online Catalog is Available for Download!