Return to Torchmate Home Page
 
Large Capacity
CNC Cutting Systems
  
Could your business benefit from a large industrial CNC Cutting Table?  You will be amazed by the affordability of a Torchmate large capacity system.

If you need to cut large sheets of metal, then Torchmate has the means and experience to help you automate your cutting process.  Click on thumbnail images to see large photos.  Use back button on your browser to return.
 
Call Toll Free (866) 571-1066
or (775) 673-2200 (outside North America)
or email our sales team at sales@torchmate.com
with questions and to receive a custom quote.

Our 2009 Online Catalog is Available for Download!
 

Here is a 10' x 40' Torchmate 3 in Houston, Texas.

This customer loads one 10' x 20' sheet while the other is being cut.  This way they stay in constant production.  Click on the thumbnail images to the right in order to enlarge the photo.

This is a 10' x 40' Torchmate 3 Finished Bolt Together System in New Mexico

Click on the thumbnail images to the left to see large pictures of this system operating, and the project underway by this tank manufacturer.

This is a 6' x 20' Torchmate 3 that is used for building boats in Long Beach, California.  Note the stack of aluminum plate behind machine waiting to be cut.

Click on the images to the right to see shots of an actual boat being built and then the finished product.
 


These are two Torchmate Systems set up in a new factory for production in Mexico.  The first machines they installed were a 8' x 20' Torchmate 3 and a 8' x 30' Torchmate 3.

Click on the thumbnail images to the left to see larger photographs.

Here is a 10' x 30' Torchmate 3 with a water table in Montana.  This table is setup for both plasma and oxy-fuel torches.

Click on the thumbnail images to the right to see large photos.

Another customer with a water table setup.  This time we are looking at a 8' x 40' Torchmate 3 in Malaysia running both plasma and oxy-fuel.  Note the operators booth next to the system.

Click on thumbnails at left to see larger photos.

 

This customer in Kentucky was planning ahead for expansion.  What you see here is a 6' x 12' Torchmate 3 Gantry Kit that was modified and built on a 8' x 20' Frame. 

This Torchmate system runs 24 hours per day, 6 days per week according to its owner.

 

This is a 8' x 20' Torchmate 3 in New Jersey.

This machine is used strictly for heavy plate cutting with oxy-acetylene.  Click on the thumbnails to the left for larger photos.
The photo to the right is a 7' x 20' Torchmate 3 in India.

The owner tells us his machine runs through two shifts, 20 hours per day. 

Our 2009 Online Catalog is Available for Download!
 Call Toll Free (866) 571-1066
or (775) 673-2200 (outside North America)
Email our sales team at sales@torchmate.com
with questions and to receive a custom quote.

Check out Torchmate's Newest Accessories