| Once again, you
asked for a system with capabilities well beyond anything in its price
range. In true Torchmate form, we are proud to bring you the
Torchmate 4. Available in speed
ranges from 300 to over 1,500 inches per minute with your choice of built
in computer controlled water table or downdraft. We wanted to bring you a truly special
machine at a truly special price. We challenge you to find a
comparable system for less than $150,000. |
 |
| We developed the
Torchmate 3 in response to requests from a number of businesses
for a complete, finished machine that could be assembled and put to work
in three to four hours. It has features suggested by
a number of suppliers of large $100,000 machines, whom we consulted.
Priced at $7,795 for the 4' x 8' kit and $10,995 for the bolt-together finished machine, it includes totally different electronics than our
other machines. |
 |
| The
Torchmate 2 was designed for continuous plasma or oxy-fuel use in
industrial settings. It uses precision linear motion components for
the Y (short) axis, and its electronics are fully equipped for 3 axes.
Add our optional Z axis column and a router or drill to produce shapes or
holes in wood, plastic, laminate, soft metals, etc. You fabricate
the rail system from about $400 worth of locally purchased steel (exact
cost varies with your location).
Kit completion time averages approximately 16 hours. A complete
system can be put together for under $7,500 using your plasma cutter and
PC. |
 |
| The 2 axis
Torchmate 1,
is intended for intermittent use by small shops owners and others on a
budget. This unit starts at $3,594.00 for a complete system less
plasma cutter and PC. The kit requires about $450 worth of steel,
which you purchase locally to save shipping costs. Completion time
is approximately 40 hours. |
 |
